An Airless Pump Bottle is a non-pressurized vacuum disp […]
An Airless Pump Bottle is a non-pressurized vacuum dispensing system that utilizes a mechanical pump in a bottle. As you push down on the pump, the disc in the bottle rises to push the product out of the pump. Once the bottle is filled, the material stored inside the bottle is preserved and maintain its integrity until used up. Airless packaging will help increase the shelf life of the final product.Using a conventional pump bottle, when the content in the bottle gets low the tube in the bottle will no longer be able to pull the products to the pump, so the common practice is to remove the pump and try to get the remaining material out with the use of a spatula type of tool.
With the repeat opening of the pump and expose the content to air, some products will end up being oxidized and lose its effectiveness. With the airless bottles, the material inside the bottles will be able to dispense completely, which will not require the opening of the pump and therefore, the integrity of the content can remain stable throughout its use.The bottle does not need to be sitting upright to pump the content out. In the event of traveling or artist in the field, the content can be dispensed immediately upon removing from storage without waiting for the content to shift and settle to the bottom.The content in the bottle will hold a longer shelf life when it does not come in contact with air.
Love the product you have, such as foundation and moisturizer, but the packaging does not come with a pump. Simply transfer the product into an airless bottle for easy dispensing application.It will depend on the structure of the bottle. Some of the airless bottles are not refillable. Once the content is filled at the factory and sealed, the bottle is being disposed upon emptying. Some are refillable. Once the bottle is empty, utilizing a sanitized stick type of tool, push the disc all the way down to the bottom and refill.
A word of caution, only refill the bottle if you believe you can properly sanitize the bottle and re-purpose.Due to different ingredients, consistency, pH and other factors, the only way to find the answer is to perform a proper fitness test. Fitness test is a must prior to production to ensure success in a product launch.For larger production, the filling process is usually done by machine. If you are filling it by hand, make sure there is no air in the bottle as it will prevent the bottle from working correctly. There are many YouTube videos you can view to learn about the filling process. Generally, after a few practices, you should have no problem with filling the bottle.