Cosmetic treatment pump emulsions, such products have a […]
Cosmetic treatment pump emulsions, such products have a water content of about 10% to 80%, and have a certain fluidity. Emulsion cosmetics occupies a certain share in the cosmetics market, therefore, the market volume of cosmetic packaging emulsion bottles is also large. With the continuous development of the cosmetics market, the market demand for lotion bottles is also rising. There are two forms of the emulsion bottle on the cap. The common one is to match the cap with the emulsion pump, and the cap is squeezed with the emulsion pump, which can effectively control the amount of emulsion squeezed. The cost is also higher.
The other is the ordinary bottle cap packaging, but the bottle mouth is often set very small, which can also effectively control the amount of emulsion 3, but it is not convenient to use the emulsion pump. The main materials of lotion bottles are acrylic, glass and metal, and the outer packaging is mainly pursuing exquisiteness and high-end. The purchasers of lotion bottles are mainly large-scale cosmetics companies, and the purchasers have a comparatively superior say in the purchase price, which is a challenge for lotion bottle manufacturers. The dispenser is divided into two types: the mouth type and the screw type.
From the function point of view, it is divided into spray, foundation cream, emulsion pump, aerosol valve, the size of the vacuum bottle and the pump head are determined by the diameter of the matching bottle. The specification is 12.5mm-24mm, and the water output is 0.1ml/time-0.2ml/time. It is generally used in the packaging of perfume, gel water and other products. The length of the same diameter of the take-over can be determined according to the height of the bottle. Emulsion pump head specifications range from 16ml to 38ml, and the water output is 0.28ml/time-3.1ml/time. It is generally used in creams and washing products. Special dispensers such as foam pump heads and hand buckle spray heads are non-inflatable hand pressure pump heads. No foaming is required to generate foam.
Only a light press can produce quantitative high-quality foam. Generally equipped with special bottles. Hand button spray heads are commonly used in cleaning products and other products. Vacuum bottles are usually cylindrical, with specifications of 15ml-50ml, and some have 100ml. The overall capacity is relatively small, relying on the principle of atmospheric pressure, which can avoid pollution caused by cosmetics during use. Vacuum bottles have anodized aluminum, plastic plating, and colored plastic. The price is more expensive than other common containers, and the general order quantity is not high. The composition of the distributor is more complicated, generally including: dust cover, snap head, snap rod, gasket, piston, spring, valve, bottle cap, pump body, straw, valve ball (with steel ball, glass ball). Bottle caps and dust caps can be colored, electroplated, and can be covered with anodized aluminum rings.